Each week we feature a card or project with instructions and what products were used.
This week, a card with an acetate panel.
Close up of the sweet Penny Black kitty stamp used.
The finished card
What I used
Stamps - Penny Black -Daisy Love (40-065)
Sentiment - PB-Special Wishes (30-229 Clear Stamp set
Paper - Yellow, white, green card stock, green gingham paper
Daisies are a small punch with dots from a
hand held punch in yellow
A piece of Acetate 51/2 inches by 6 inches tent folded
Word Die is Spellbinders Fancy Tags Two (S5-030)
Corner die on front - Spellbinders Lace Doily Accents (S5-062)
How I did it
From the yellow card stock, I made a card base measuring 51/2 by 12 inches,
folded tent style to create a 51/2 by 6 inch card
Cut a piece of Acetate, or you can use any clear packaging material the same size as
the front of your card.
Decide the layout of your card .
I cut a piece out of the front of my card about 1 3/4 inches wide.
I then lined up the piece of acetate with the inside of the piece I left at the
top of the card and adhered it in place.
Then, I adhered the bottom piece that was left after I cut out the 1 3/4 inch piece
over the acetate. I just used a clear tape runner, because I covered the inside
with the gingham paper.
Punched the daisies, glued the circles in the middle. Across the top, I popped up
five daisies on the top flap that I left on the card.
On the inside, after adhering the gingham paper to all the inside, except the acetate
strip, I centered five more daisies across the gingham so they show through .
Popped up the image on the bottom of the front, added the corners, and adhered
the sentiment label to the inside.
Thanks for stopping by today.
Have a great week.